Skip to main content

Fuel Cell Advantages

Fuel Cell Advantages

A fuel cell is a device that directly converts the chemical energy of fuel into electrical energy. Theoretically speaking, as long as the fuel cell is continuously supplied with fuel, the fuel cell can generate electricity continuously. It has been hailed as the fourth generation of power generation technology after water power, thermal power, and nuclear power.

High power generation efficiency. Fuel cell power generation is not restricted by the Carnot cycle. In theory, its power generation efficiency can reach 85% to 90%, but due to various polarization limitations during operation, the current energy conversion efficiency of fuel cells is about 40% to 60%. If combined heat and power are realized, the total fuel utilization rate can be as high as 80%.

Environmental pollution is small. When the fuel cell uses hydrogen-rich gas such as natural gas as fuel, the carbon dioxide emissions are reduced by more than 40% compared with the heat engine process, which is very important to alleviate the global greenhouse effect. In addition, because the fuel gas of the fuel cell must be desulfurized before the reaction, and it generates electricity according to the electrochemical principle, there is no high-temperature combustion process, so almost no nitrogen and sulfur oxides are emitted, which reduces the pollution to the atmosphere.

Higher than energy. The specific energy of liquid hydrogen fuel cells is 800 times that of nickel-cadmium batteries, and the specific energy of direct methanol fuel cells is more than 10 times higher than that of lithium-ion batteries (rechargeable batteries with the highest energy density). At present, although the actual specific energy of fuel cells is only 10% of the theoretical value, it is still much higher than the actual specific energy of general batteries.

Low noise. The fuel cell has a simple structure, few moving parts, and low noise during operation. Even in the vicinity of an 11MW fuel cell power plant, the measured noise is less than 55dB.

Wide fuel range. For fuel cells, as long as the substances containing hydrogen atoms can be used as fuels, such as fossil products such as natural gas, oil, coal, or biogas, alcohol, methanol, etc., fuel cells are very in line with the demand for energy diversification and can slow the mainstream Depletion of energy.

High reliability. When the load of the fuel cell changes, it will respond quickly. Regardless of the overload operation above the rated power or the operation below the rated power, it can withstand and the efficiency changes little. Because the fuel cell is highly reliable in operation, it can be used as a variety of emergency power sources and uninterrupted power sources.

Easy to build. The fuel cell has an assembled structure, which is convenient for installation and maintenance and does not require many auxiliary facilities. The design and manufacture of fuel cell power plants are quite convenient.

The numerous advantages of fuel cells also make it an extremely important position in the field of new energy, and its future development has unlimited possibilities.


Related Recommend

Ultrasonic spray technology is bringing value to the fuel cell industry in the production of fuel cells and the production of hydrogen for fuel cells. Our coating technology has been proven to increase the efficiency level of the membrane exchange process because the catalyst distributed on the membrane has a surface modified quality. The important thing is that we have created a higher-value complex solution whose scale and speed are sufficient to meet the process requirements of the complete production level of the fuel cell industry.



About Cheersonic

Cheersonic  is a professional manufacturer in the development and application of liquid ultrasonic atomization technology into nozzle systems and spraying and coating application systems. Compared to conventional pressure spraying methods, the company’s ultrasonic nozzles do not clog, reduce liquid usage, waste, and environmental impact while achieving much more precise, uniform, thin film coatings. Cheersonic is continually developing new applications for its unique technology, replacing wasteful practices in a world that is growing ever more environmentally sensitive. For more information, visit the company at http://www.cheersonic-liquid.cn/en/fuel-cell-coating/. 


Comments

Popular posts from this blog

Fuel Cells Enable Green Ships

  Fuel Cells Enable Green Ships Ship pollutant emission standards have become stricter, and  fuel cells  have become the first choice for green ships. With the improvement of ship environmental protection requirements, the power system adopts clean energy. As a power system with high energy efficiency, zero pollution and low vibration noise, fuel cell system is the first choice for the development of ship power plants in the future. China’s ship power system is dominated by diesel engines. There are problems such as low energy conversion rate, high fuel demand, and serious environmental pollution. With the rising demand for environmental protection, at the end of 2019, 712 exhibited its own research and development at the Shanghai International Maritime Exhibition. The key performance indicators of the 500kW-class marine hydrogen fuel cell system have reached the international advanced level. my country has made major breakthroughs in the study of clean fuel cell ships. A...

Fuel Cell Manufacturing Using Ultrasonic Spray Technology

Fuel Cell Manufacturing Using Ultrasonic Spray Technology A variety of fuel cells utilize catalysts at both the anode (to oxidize fuel and convert it to protons/hydrogen cations and electrons) and the cathode (convert hydrogen cations and oxygen to water), often precious metal, nanocarbon, or other nanomaterial-based. Doped carbon nanotubes and core-shell metallic or composite nanoparticles are two examples of such. Such catalyst materials need first to be synthesized and then coated onto electrode and/or membrane surfaces for use in fuel cells. Solid oxide fuel cells (SOFCs) that do not utilize catalyst coatings are also of interest. Cheersonic high-temperature nozzles, nebulizers, and particle generators can be used for fuel cell catalyst nanomaterial synthesis via chemical vapor deposition and/or spray pyrolysis techniques. Moreover, Cheersonic can custom manufacture AACVD and spray pyrolysis systems for fuel cell catalyst synthesis, based on customer goals and requirements, whether...

Voltage reversal phenomenon is one of the main culprits of fuel cell failure!

Voltage reversal phenomenon is one of the main culprits of fuel cell failure! Operation errors, harsh working conditions and the anode gas shortage caused by the external environment are the main culprits for the voltage reversal. The voltage reversal is mainly accompanied by the water electrolysis reaction and the carbon corrosion reaction, and the attenuation of the battery cannot be reversed. Optimizing system control strategies and developing anti-reverse electrode materials are the main countermeasures. Cost, performance and durability are the three major obstacles to the commercialization of proton exchange membrane fuel cells. Among them, durability refers to the ability of a material or product to resist the long-term destructive effects of both itself and the objective environment. Generally, the working conditions that accelerate fuel cell degradation (affect durability) include start-stop, freezing/melting, idling (high potential), dry/wet cycle, and variable load. The parti...